How many times have you been working around your house, or at a friend’s house, and have to find somewhere on the wall to hammer a nail to hang a painting. And just when you think you discover the stud to hammer the nail – you end up making a hole into the wall and making a mess. You may want to think about Walabot, among the very first smart stud finders to hit the marketplace. D-Tect 150 Wall Scanner

Walabot is produced by Vayyar Imaging, a 3D imaging sensor company that provides consumers with a way to see through objects, liquids and materials. The company chose to utilize its technology to produce Walabot and supply DIYers an opportunity to get a better look behind walls than the present stud finders you find on the marketplace.

The device is the very same size as a mobile phone and easily connects to it by means of a magnet supplied in the box, and put on the back of your Android phone. Note that Walabot only connects with Android phones. If you have an iOS phone, you are going to need to wait. The company informed the public that the iOS version is on their roadmap. If you don’t want to wait, there is an option for you: borrow a buddy’s Android phone to use the gadget. Otherwise, go to Walabot’s site, and enter your e-mail address to get alerted when the iOS application launches.

D-Tect 150 Wall Scanner

D-Tect 150 Wall Scanner

What Is Walabot? D-Tect 150 Wall Scanner

It is a gadget that connects to your Android phone and sends an image of what it sees behind your walls. On your phone screen, you see images of wires, studs, pipes – even pests! Think about an in-wall imaging mobile application, and you basically get the idea. D-Tect 150 Wall Scanner

The unit is about the size of a cell phone, although it is a little thicker. One side of it has a magnet to connect to your phone, and the other side is flat and smooth. The flat side is the one you will use to run the gadget across your walls while you view your phone screen to see what appears. The flat side should be held to the wall straight, not at an angle, so you can see what you want to.

What’s in the box: It comes with a DIY sensor, a USB cable, a magnetic disc, a protective sheet, and a manual.

Walabot-Box

The manual will inform you how to see right through walls and interpret the images you see. It is pretty comprehensive, so it wouldn’t be difficult to begin using the Walobot with a few minutes of its arrival. D-Tect 150 Wall Scanner

If you are thinking this sounds like magic, we are here to tell you it’s science. Oh, and if in case you were thinking people might utilize it to check out your house from the street, it is not built for that. It is for people who are DIYers or expert carpenters.

 

What are other things can you accomplish with a Walabot?

The Walabot can detect circuitry, pipes, and everything you would expect to find behind your walls. Using the gadget, you can:

  • Look for leaks.
  • Look for structural damages.
  • Look for broken pipes.
  • Discover rats and other creatures. The Walabot can identify movement behind walls, assisting you locate nests and rodents.

 

How does the Walabot DIY work?

How-To-Use-Walabot

When you receive your Walabot DIY, you would need to download the Android application for it and then sign up for an account. Attach the Walabot DIY to your mobile phone and you are set to calibrate the Walabot DIY.

Do not worry, calibrating the device is extremely easy and if you have used an analog stud finder before, you would find the process very similar.

The images it gives you are extremely accurate, and you would know if it is a pipe that the Walabot DIY is seeing or electrical wires, or anything else.

This is simply best for those who are considering refurbishing their homes, or those who enjoy Do It Yourself tasks. This likewise is available in very handy for those who have an interest in architecture and building.

 

Models

The DIY Model

Walabot-DIY-Model

The makers obviously thought in two distinct classifications when producing this device. The DIY model is for the individual doing occasional repairs and little jobs around the house.

What does it offer? D-Tect 150 Wall Scanner

It includes a range of basic features. You can use it as described above to see wires, pipes, studs (both wood and metal) and even bugs and rodents.

These views work for both concrete and wood on this model.

This model also lets you change the depth of field so that you can see four inches deep if you need to. You can alter it to use less depth.

The images on the screen are excellent, and they are displayed in color. You can likewise scan across your wall and get a graphic representation of the objects, with an indicator of how far apart they are. This is useful for preparing a task that includes the entire wall.

One feature permits you to take a picture of a location you are scanning, so you can place the image on a computer system and take a look at it more closely. This makes it easier to sit at your desk and make plans while looking at the image.

This is a good standard unit for homeowners and other DIYers. You won’t miss the advanced features if you plan to do light duty repairs and refurnishing around your home. It will certainly identify studs for you, so when you hang heavy paintings or mirrors, you will have a strong landing place for your nails or screws.

 

The professional models can be found in 3 variations. Let us look at what they provide you.

The Starter Version

Walabot-Starter-Pack

Each model includes all the features of its predecessor. This model provides basically the very same images that the DIY does, though they are a tad bit clearer with the Starter.

It can not only spot items behind walls, it can spot breathing. That is quite uncommon. This makes it helpful for anyone who wishes to monitor an older individual they are taking care of. If you think you might have sleep apnea, it might tell you how often you stop inhaling throughout the night. Going from driving nails to viewing breathing is a respectable leap, but perhaps the maker thought, “Why not? We have the technology. May as well use it.”

The unit works as a movement detector too. Not only is this appropriate for bugs behind walls, but it is likewise good for keeping track of rooms and patios where individuals or animals shouldn’t be.

It has 3 antennas, making it far more sensitive than the basic model.

With this model, you have actually stepped up into some advanced| features, along with much better imaging than the DIY version. Bear in mind that it has all the features of the DIY and they have boosted sharpness and precision. With Starter, you have dipped your toe into the waters of professionalism.

 

The Creator

Walabot-Creator-Pack

What makes this model different from the predecessors?

This model contains all the features of the Starter model although has much better spatial sensing. This is due to the fact that it can track in 3D, giving you a much fuller look at areas and items. If you were sawing out a square of drywall or trying to break through concrete in a specific area, you would require to understand a lot more than where studs are. It has 15 antennas, indicating it does not miss out on much.

This model puts you directly in the professional ranks. It is more likely than the lower models  to find hard-to-see hazards and objects and to show them to your clearly.

Look this one over carefully. It could have all the features you need on an average day. It is, naturally, less expensive than the next model, and the imaging is excellent. There is no need to spend for features you will never ever use, so compare carefully.

 

The Developer

Walabot-Developer-Pack

What is the most powerful model? D-Tect 150 Wall Scanner

This has all the features we have taken a look at up until now. Other than they work much better on this model. So the imaging, spatial recognition, motion detection and even the breath detector are more sensitive and finely tuned.

This unit has 18 antennas, which gives it the broadest range of frequencies. It has high resolution 3D imaging and can supply raw signal information. This is the best view behind your walls you are going to get without tearing down drywall.

You are going to know exactly what is behind walls, whether concrete or drywall. This imaging is much clearer than the other models, and the 3D capabilities end the uncertainty. It is not tough to imagine a professional utilizing this for a pricey task where errors are costly.

 

What you would love about Walabot DIY

Unlike other imaging devices that are presently readily available, the Walabot DIY is not bulky. You can get the capabilities of high end stud finders and imaging systems. You get 3D imaging conveniently and easily without needing to pay top dollar for it.

Above that, it’s really small and portable. With the magnet on the casing, you can work the Walabot DIY gadget and your own smart phone as one unit.

Everything about using the Walabot DIY is extremely easy. You don’t need to stress over electrical wiring, as you only have to connect it to your smart phone using the included USB cable. All the settings and tweaks are done utilizing the mobile phone. Calibrating the device is also made easy.

Plus, you have simple guidelines provided for you on the mobile application itself or you can view videos from the company’s website to learn how to use your Walabot DIY.

What is more, it does not use x-ray innovation, which makes it really safe and you can utilize it without ionizing radiation.

In other words, this is a portable and safe device that gives you great 3D images that you can utilize for your house restoration jobs or home improvement requirements.

 

Rates and Returns

If you are just a homeowner aiming to do light repairs on your home or simply want to play around with brand-new gadgets for your home, the Walabot DIY starts at just $79.99!

The other three more advanced models: the Walabot Starter Pack, Walabot Creator Pack, and the Walabot Developer Packare priced at $149.99, $149.99, and $599.99 respectively.

These designs are more costly due to the added advance features in the models, in addition to the enhanced image quality on these models, and overall, it is a much stronger gadget that can do a lot more than the standard model.

Not happy with the performance of your Walabot or have a defective model?

Walabot-Return-Policy

 

That is totally fine! Walabot says on their site that they have a 30-day return policy! Remember that returns will only be accepted if the return request was sent out within thirty days of the customer receiving the item at their delivery area. Walabot can not refund third party purchases (such as from Amazon.com or B&H Photo).

 

Final thoughts about the Walabot D-Tect 150 Wall Scanner

Walabot is a blessing to people who enjoy house restorations and those who like to play with their home decoration. It can likewise assist when you have rodents and pests living inside your walls. You can finally see what’s behind your walls, even if you are not Superman and do not have his X-ray vision.

Walabot DIYprovides you an easy way to see through cement or drywall, and inspect pipelines, studs, and wires. And you can get 3D images saved to your phone so that you could evaluate it later on.

What do all of these help you with? D-Tect 150 Wall Scanner

For one, you can utilize Walabot DIY to know just how deep you could drill in order to avoid damaging the pipelines or cutting the wires behind your walls. You can likewise adjust and calibrate the sensing units’ level of sensitivity to much better match the imaging to your specific task.

You can never ever go wrong with the Walabot DIY. And if you want to take it an action even more, you can always purchase the more advanced packs that the company offers. D-Tect 150 Wall Scanner