How many occasions have you been working around your house, or at a good friend’s place, and have to look for a place on the wall to hammer a nail to hang a picture. And just when you believe you discover the stud to hammer the nail – you end up making a hole into the wall and making a mess. You might want to consider Walabot, one of the very first smart stud finders to hit the market. Infrared Wall Scanner
Walabot is manufactured by Vayyar Imaging, a 3D imaging sensor company that offers consumers with a method to see through objects, liquids and materials. The company decided to utilize its innovation to create Walabot and offer DIYers an opportunity to get a better look behind walls than the current stud finders you have on the market.
The gadget is the same size as a mobile phone and quickly attaches to it by means of a magnet provided in the box, and put on the back of your Android phone. Note that Walabot just works with Android phones. If you have an iOS phone, you are going to have to wait. The company informed the public that the iOS version is on their roadmap. If you don’t wish to wait, there is a choice for you: borrow a pal’s Android phone to utilize the gadget. Otherwise, go to Walabot’s site, and enter your email address to get alerted when the iOS app launches.
Infrared Wall Scanner
What Is Walabot? Infrared Wall Scanner
It is a device that connects to your Android phone and sends an image of what it sees behind your walls. On your phone screen, you see images of wires, studs, pipes – even pests! Think about an in-wall imaging mobile app, and you pretty much get the idea. Infrared Wall Scanner
The device is about the size of a mobile phone, except it is a bit thicker. One side of it has a magnet to attach to your phone, and the opposite is smooth and flat. The flat side is the one you will use to run the gadget throughout your walls while you watch your phone screen to see what shows up. The flat side should be held to the wall directly, not at an angle, so you can see what you need to.
What’s in the box: It comes with a DIY sensor, a USB cable, a magnetic disc, a protective sheet, and a manual.
The manual will tell you how to see right through walls and interpret the images you see. It is pretty extensive, so it would not be tough to get started utilizing the Walobot with a few minutes of its arrival. Infrared Wall Scanner
If you are thinking this sounds like magic, we are here to tell you it is science. Oh, and if in case you were thinking people could use it to look into your home from the street, it’s not produced for that. It is for individuals who are do-it-yourselfers or professional carpenters.
What are other things can you do with a Walabot?
The Walabot can find circuitry, pipes, and whatever you would anticipate to discover behind your walls. Using the gadget, you can:
- Look for leakages.
- Look for structural damages.
- Look for broken pipes.
- Find rats and other animals. The Walabot can detect motion behind walls, assisting you locate nests and rodents.
How does the Walabot DIY work?
When you receive your Walabot DIY, you would have to download the Android app for it and then sign up for an account. Connect the Walabot DIY to your smartphone and you are set to calibrate the Walabot DIY.
Do not fret, calibrating the device is very easy and if you have actually utilized an analog stud finder in the past, you would think the process extremely familiar.
The images it provides you are very precise, and you will know if it’s a pipe that the Walabot DIY is seeing or electrical wires, or anything else.
This is simply ideal for those who are considering refurbishing their houses, or those who enjoy DIY projects. This also can be found in really helpful for those who are interested in architecture and building and construction.
The makers obviously thought in 2 distinct classifications when producing this product. The DIY model is for the person doing occasional repair work and little tasks around your house.
What does it come with? Infrared Wall Scanner
It includes a selection of basic features. You can use it as described above to see wires, pipes, studs (both metal and wood) and even rodents and bugs.
These views work for both concrete and wood on this model.
This model also lets you alter the depth of field so that you can see 4 inches deep if you need to. You can change it to use less depth.
The images on the screen are excellent, and they are shown in color. You can likewise scan throughout your wall and get a graphic representation of the things, with an indication of how far apart they are. This is great
Is good for planning a job that includes the whole wall.
One feature permits you to take a snapshot of a location you are scanning, so you can transfer the image on a computer and take a look at it more precisely. This makes it easier to sit at your desk and make plans while viewing the image.
This is an excellent standard device for house owners and other DIYers. You will not miss out on the more advanced features if you plan to do casual repairs and refurnishing around your house. It will certainly recognize studs for you, so when you hang heavy paintings or mirrors, you will have a strong landing place for your screws or nails.
The professional models are available in 3 variations. Let’s look at what they provide you.
Each model contains all the features of its predecessor. This model offers essentially the exact same images that the DIY does, although they are a bit clearer with the Starter.
It can’t just discover objects behind walls, it can spot breathing. That’s pretty unusual. This makes it useful for anybody who likes to monitor an older person they are looking after. If you think you might have sleep apnea, it could inform you how often you stop breathing in the night. Going from driving nails to watching breathing is a respectable leap, however maybe the maker believed, “Why not? We have the technology. Might as well utilize it.”
The unit acts as a motion detector also. Not only is this suitable for insects behind walls, but it is likewise good for keeping track of rooms and porches where people or animals shouldn’t be.
It has three antennas, making it far more sensitive than the basic model.
With this model, you have actually stepped up into some advanced| features, together with much better imaging than the DIY variation. Bear in mind that it has all the features of the DIY and they have enhanced sharpness and precision. With Starter, you have actually dipped your toe into the waters of professionalism.
What makes this model unique from the predecessors?
This model contains all the features of the Starter model but has much better spatial sensors. This is because it can track in 3D, providing you a much fuller look at areas and items. If you were sawing out a square of drywall or attempting to break through concrete in a specific spot, you would require to understand a lot more than where studs are. It has 15 antennas, meaning it does not miss much.
This version puts you directly in the expert ranks. It is more likely than the lower models to capture hard-to-see risks and objects and to reveal them to your plainly.
Look this one over thoroughly. It might have all the features you want on an average day. It is, obviously, less expensive than the next model, and the imaging is excellent. There is no need to pay for features you will never ever use, so compare thoroughly.
What’s the most powerful unit? Infrared Wall Scanner
This has all the features we have looked at so far. Except they work much better on this model. So the imaging, spatial recognition, motion detection and even the breath detector are more sensitive and finely tuned.
This system has 18 antennas, which gives it the broadest range of frequencies. It has high-resolution 3D imaging and can provide raw signal information. This is the very best view behind your walls you are going to get without taking down drywall.
You are going to see precisely what is behind walls, whether concrete or drywall. This imaging is much clearer than the other models, and the 3D capabilities end the uncertainty. It is not tough to picture a professional utilizing this for an expensive task where mistakes are costly.
What you would love about Walabot DIY
Unlike other imaging gadgets that are currently offered, the Walabot DIY is not bulky. You can get the capabilities of high-end stud finders and imaging systems. You get 3D imaging conveniently and quickly without needing to pay an insane amount for it.
Moreover, it’s very light and portable. With the magnet on the casing, you can work the Walabot DIY device and your own mobile phone as one unit.
Everything about using the Walabot DIY is extremely simple. You don’t need to stress over circuitry, as you only have to link it to your smart phone utilizing the included USB cable. All the settings and tweaks are done using the smart phone. Adjusting the gadget is also made easy.
Plus, you have easy-to-follow directions provided for you on the mobile application itself or you can watch videos from the company’s site to learn how to utilize your Walabot DIY.
What’s more, it doesn’t utilize x-ray innovation, that makes it really safe and you can utilize it without ionizing radiation.
In short, this is a portable and safe device that gives you terrific 3D images that you can use for your home renovation jobs or house improvement requirements.
Prices and Returns
If you are just a property owner seeking to do light repairs on your house or simply want to play around with brand-new devices for your home, the Walabot DIY starts at simply $79.99!
The other 3 advanced models: the Walabot Starter Pack, Walabot Creator Pack, and the Walabot Developer Packare priced at $149.99, $149.99, and $599.99 respectively.
These designs are more expensive due to the added advance features in the models, along with the improved image quality on these models, and overall, it is a much stronger device that can do a lot more than the model.
Not pleased with the performance of your Walabot or have a defective model?
That’s totally fine! Walabot says on their website that they have a 30-day return policy! Bear in mind that returns will only be accepted if the return request was sent within thirty days of the customer receiving the item at their delivery area. Walabot can’t refund third party purchases (such as from Amazon.com or B&H Photo).
Last word about the Walabot Infrared Wall Scanner
Walabot is a godsend to people who are into house remodellings and those who like to tinker with their home decoration. It can likewise help when you have rodents and bugs living inside your walls. You can finally see what’s behind your walls, even if you are not Superman and do not have his X-ray vision.
Walabot DIYgives you an easy method to see through cement or drywall, and check pipes, studs, and wires. And you can get 3D images saved to your phone so that you can examine it afterwards.
What do all of these help you with? Infrared Wall Scanner
For one, you can use Walabot DIY to know just how deep you can drill in order to avoid harming the pipes or cutting the wires behind your walls. You can likewise adjust and calibrate the sensing units’ sensitivity to better fit the imaging to your specific project.
You can never go wrong with the Walabot DIY. And if you want to take it an action even more, you can always purchase the more advanced packs that the company offers. Infrared Wall Scanner